You know when stuff get on top of you a bit? Well some people eat, some people drink, I tend to buy things..
I had a couple of things delivered as you may have guessed... Got some screw pins but Tamiya ones were expensive so I got a couple of bags of traxxas ones, theres 8 in each bag and are 3mm with various lengths, which I think is great. I also got a rear axle and 2 center gearboxes, for what will eventually be the crawler. The axle was on offer on Amazon for just under £7 so after ordering 1 and seeing the quality I ordered another couple. they could be good for a rear wheel drive hotrod. (The front driven Axle is on order, as is a standard one) Regards
Lee Attachments:
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation. |
Those Traxxas screwpins are 3.14mm thick so they won't fit a standard Tamiya without drill the holes with a 3.2mm drill bit.
I have used those on my TL01 Escort build.
The following user(s) Liked this: jord001
|
|
Please Log in to join the conversation. |
Its ok Richard they are for some 3d printed parts so size is not a problem, going to be drilling the holes out anyway. Thanks for the heads up.
. Regards
Lee
The following user(s) Liked this: caprinut
|
|
Please Log in to join the conversation. |
|
Pretty nice. From wich brand is the civic?
|
Please Log in to join the conversation. |
|
Like the tamiya indian head civic.
The following user(s) Liked this: jord001
|
Please Log in to join the conversation.
Last edit: by stingray-63.
|
|
Attachments: |
Please Log in to join the conversation. |
|
Attachments: |
Please Log in to join the conversation. |