|
I killed my Nissan patrol engine. going to holidays today.
|
Please Log in to join the conversation. |
|
Only a little work and it could be a boat lol.
m.facebook.com/...3469460732 |
Please Log in to join the conversation. |
Did several things today.
Cleaned my old TEU101BK speed controller that took ages!! 10 years ago there was rarly a waterproof esc and if they were, they cost a arm and a leg. So I used to put a balloon on my esc, clear silicone in the end and two small zip ties at the end. They never failed and my CC01 was more under water than above. With age the balloon had turned into slime, and was really messy to get rid of. But 1.5 hours later, it was useable. I'm making my #2 Strike a runner, and it was only missing a esc. I'll making a stand off tomorrow so I don't need to shorten the motor wires. Last winter I got hold of a Tactic transmitter set for my custom crawler and finally got round to start swapping out my old radio gear. I like to waterproof my crawlers, so I took the receiver apart and did two coats of clear nail polish. It really works and are cheap!
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation. |
|
I will do that Richard.
The following user(s) Liked this: caprinut
|
Please Log in to join the conversation. |
I recomend 2 coats and wait a couple of hours between each coat. Put it together the next day to let it fully cure
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation. |
The following user(s) Liked this: stingray-63, AndyAus
|
|
Please Log in to join the conversation.
Last edit: by caprinut.
|
|
Perfect Richard.
The following user(s) Liked this: caprinut
|
Please Log in to join the conversation. |