|
I got given a (fairly cheap) USB microscope a few years ago, it's not the sort of thing that gets used that often, but sometimes it's the only thing that will do a particular task.
Take today - I was getting distortion on one of my turntables so cleaned the stylus by blowing on it, using a carbon fibre brush, then using the same brush with a stylus cleaning solution ... no improvement. I wanted to check that wear wasn't the problem (which would have been disappointing with only 150 hours or so on that stylus) ... just look at the clag & fibres on the tip & the debris on the front of the holder... this was all invisible to the naked eye, but no wonder it sounded like cak. Second pic is after cleaning with straight IPA & a tiny paintbrush. - no wear The stand/holder part of the kit is awful, BTW... |
Please Log in to join the conversation. |
Those images are quite impressive, all considered.
Signature now gets correct formatting if you edit it in your Profile. Use normal BBcode if you want.
www.tamiyabase.com was formatted automatically. |
|
Please Log in to join the conversation. |