Keyword

TOPIC:

It's tool time! 9 months 3 weeks ago #75420

I had one of the worst days at work I have had in years, All because a worker didn't pay attention to what they were doing and caused 4 in ceiling tv lifters to jam 😵 After spending 6hrs fixing them I needed some retail therapy, On the way home I stopped at the big green box and head straight to the tool shop. I have wanted a countersink/deburring set and a thread tap t handle but the price, Thankfully they had been discounted which made the therapy even better 😶

 

 
If you can't fix it with a hammer, you've got an electrical problem mate :)
Attachments:
The following user(s) Liked this: caprinut, stingray-63, 1972 LeMansGT Jim, Ducksnuts, GToddC5

Please Log in to join the conversation.

It's tool time! 9 months 3 weeks ago #75450

Earlier this week I bought two bottles of these.
Handy to remove rust on resto projects.
These was on sale so I had to get them while they were cheap ish lol

The following user(s) Liked this: stingray-63, Ducksnuts, GToddC5

Please Log in to join the conversation.

It's tool time! 9 months 3 weeks ago #75452

Yes a great product, I watch a lot of tool restoration channels and they all use it. I grabbed one on sale too for  AUD$20 😁 It normally sells for much more here 😵
If you can't fix it with a hammer, you've got an electrical problem mate :)
The following user(s) Liked this: caprinut

Please Log in to join the conversation.

It's tool time! 9 months 3 weeks ago #75455

Yeah I've watched some of them too.

Those were around 15AUD, cost normally around 23 each bottle.

Please Log in to join the conversation.

It's tool time! 9 months 1 week ago #75574

Just in time to make some special parts, A set of fluted bits and a 1.5mm parting tool for my lathe :) 

 

 

 
If you can't fix it with a hammer, you've got an electrical problem mate :)
Attachments:
The following user(s) Liked this: caprinut, 1972 LeMansGT Jim, GToddC5

Please Log in to join the conversation.

It's tool time! 9 months 5 days ago #75599

  • Al
  • Al's Avatar
  • Away
  • Impressive Numbers
  • Impressive Numbers
  • Posts: 1479
  • Likes received: 1694


I was in my garage looking for some paperwork today and found this. It would have been my dads, I would have brought it back to mine a few years ago after clearing out their house.
Any way I’m sure it will come in handy.
I’m assuming all the different attachments are a universal fit on these ?
 
Attachments:
The following user(s) Liked this: stingray-63, AndyAus, 1972 LeMansGT Jim, GToddC5

Please Log in to join the conversation.

It's tool time! 9 months 4 days ago #75605

Yes same as Dremel stuff I belive.
I do use cheap kit for my Dremel since a orginal Dremel kit is quite expensive.
The following user(s) Liked this: Al

Please Log in to join the conversation.

It's tool time! 9 months 3 days ago #75610

  • Al
  • Al's Avatar
  • Away
  • Impressive Numbers
  • Impressive Numbers
  • Posts: 1479
  • Likes received: 1694
Cheers Richard, I’ll need to have a look for some other bits for it.

Please Log in to join the conversation.

It's tool time! 7 months 1 week ago #76093

I have been looking for a better body hole reamer, Found this beauty 😁 From the dark side 😄

 
 
If you can't fix it with a hammer, you've got an electrical problem mate :)
Attachments:
The following user(s) Liked this: caprinut, stingray-63, Al

Please Log in to join the conversation.

Moderators: caprinutstingray-63AndyAus
Time to create page: 0.371 seconds
Cookies are required to make this site work. If you continue to use this site you permit us to use cookies.