TamiyaBase Model DatasheetTGX-Mk.1 TS Double Deck type (44010) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 44010 |
 |
| Model name: | TGX-Mk.1 TS Double Deck type | |
| Scale: | 1/8 | |
| Chassis: | TGX-Mk.1 TS
|
|
| Release date: | 22 Apr 1998 | |
| Last year available: | ||
| Price at release date: | 19800 Yen | |
| Type of model: | Chassis | |
| Body type: | None | |
Dimensions and weight |
|
| Overall length: | 450 mm |
| Overall width: | 226 mm |
| Overall height | 148 mm |
| Wheelbase: | 300 mm |
| Tread/track front: | 190 mm |
| Tread/track rear: | 190 mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 8,1 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | |
| Suspension type, rear: | |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
41006 SILICONE FUEL PIPE 41015 24mm AIR CLEANER 41017 80CC FUEL TANK 41018 THROTTLE SERVO HORN 41021 STARTER ROPE HOLDER 50038 TOOL SET 50170 NYLON BAND SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50473 HI-TORQUE SERVO SAVER 50573 2X8mm TAPPING SCREW x 10 50574 2X8mm COUNTER.TAPP.SCREW x 10 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50579 3X10mm STEP SCREW x 5 50580 3X10mm HEX BOLT x 10 50581 3X12mm COUNTER.TAPP.SCREW x 10 50582 3X14mm STEP TAPPING SCREW x 5 50583 3X15mm TAPPING SCREW x 10 50585 4X10mm STEP SCREW x 5 50586 3mm WASHER x 15 50587 3mm SPRING WASHER x 15 50588 2mm E-RING x 15 50589 5mm E-RING x 5 50590 4mm BALL CONNECTOR x 5 50591 5mm BALL COLLAR x 5 50592 5mm BALL CONNECTOR x 10 50593 4X6mm FLANGED TUBE x 5 50594 2X10mm SHAFT x 10 50596 5mm ADJUSTER x 6 50597 DAMPER O-RING (RED) x 10 50598 V PARTS FOR 50519 50599 W PARTS FOR 50519 50600 OIL SEAL FOR 50519 x 6 50601 PISTON ROD FOR 50332/519 x 2 50602 DIFFERENTIAL BEVEL GEAR 50603 DIFFERENTIAL BEVEL GEAR SET 50604 TGX WHEEL AXLE x 2 TA02/FWD T.C 50605 SCHRAUBENZAPFEN-BEU 50606 TGX A PARTS (GEAR CASE) 50607 TGX B PARTS (F&R SUS.ARM) 50608 TGX C PARTS (FRONT UPRIGHT) 50609 TGX D PARTS (BODY MOUNT) 50610 TGX, PARTS E-(BUMPER & SIDE GUARD) 50612 TGX G PARTS (50T S.GEAR&D.CASE) 50613 TGX R PARTS (R.UPRIGHT&F.K.ARM) 50614 TGX, PARTS R-(REAR UPRIGHT/FRONT KNUCKL 50616 TGX CHASSIS PLATE 50617 TGX ENGINE MOUNT x 2 50618 TGX, JOINT CUP (LONG & SHORT) 50619 TGX CLUTCH SHOE 50620 16T CLUTCH BELL 50621 TGX SUSPENSION ARM STAY 50622 TGX THROTTLE LINKAGE 50623 16T CLUTCH BELL 50625 TGX DRIVE SHAFT x 2 50626 TGX PILOT SHAFT 50627 DRIVE SHAFT 50628 TGX BRAKE PAD x 2 50629 TGX PROPELLER JOINT (F OR R) 50630 TGX BEVEL PINION&RING GEAR 50633 4mm ADJUSTER x 6 50710 TGX SLICKS W/INNER SPONGE x 2 50788 TGX UPPER DECK SET 53030 4 X 850 SEALED BEARINGS 53066 3X1280 SEALED BALL BEARINGS 53208 LIGHTWEIGHT FLYWHEEL 87025 CERAMIC GREASE |
10444094 WHEEL (2PCS.) 11054138 INSTRUCTIONS 14304019 (53171) TR-15T UP-GRADED BRAKE DISC 15494001 PLUG WRENCH 15494002 BOX WRENCH 16095001 ANTENNA PIPE 19404125 METAL PARTS BAG A 19404126 METAL PARTS BAG B 19404127 METAL PARTS BAG C 19404128 METAL PARTS BAG D 19494012 STICKER (A, B) & MASKING SEAL 19805501 THRAEDED SHAFT BAG |
All data from www.TamiyaBase.com