TamiyaBase Model Datasheet

Mecedes CLK-GTR Team CLK Sportswear (44012)

All data from www.TamiyaBase.com

Model data
Model number: 44012
 Tamiya Mecedes CLK-GTR Team CLK Sportswear 44012
Model name: Mecedes CLK-GTR Team CLK Sportswear
Scale: 1/10
Chassis:

TG10-Mk.1

 
Release date: 15 Oct 1998
Last year available:
Price at release date: 25800 Yen
Type of model:  Touring/GT
Body type:  Polycarbonate

Dimensions and weight
Overall length: 470 mm
Overall width: 194 mm
Overall height 120 mm
 Wheelbase: 257 mm
Tread/track front: 155 mm
Tread/track rear: 164 mm
Ground clearance: mm
Weight ready to run: 1.86 kg (Fully equipped)

Paint codes
Main body color(s)

Technical
Gear ratio (lowest): 8,1 :1
Standard pinion: (module/teeth)
Motor in kit:
Speed controller in kit
Suspension type, front:

Double wishbone
Suspension type, rear:

Double wishbone
Damper type, front:
Damper type, rear:
Tyre, front:
Tyre, rear:
Wheel, front:
Wheel, rear:
 

 

Parts
All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings.
5 digit Spare Parts   7 digit Spare Parts

41006 SILICONE FUEL PIPE

41015 24mm AIR CLEANER

41018 THROTTLE SERVO HORN

41021 STARTER ROPE HOLDER

41032 1/10 SCALE GLOW-ENGINE R/C TG10 65CC FUEL TANK

41033 TG10 TM-4 MUFFLER(FS-12)

41035 TG10 TM-4 MUFFLER GASKET

41036 R/C CAR GLOW ENGINE FS-12LT

50038 TOOL SET

50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET

50197 SNAP PIN SET

50454 RACING SLICK TYRES x 2

50573 2X8mm TAPPING SCREW x 10

50574 2X8mm COUNTER.TAPP.SCREW x 10

50575 TAPPING SCREWS, 2.6X10mm (5PCS)

50576 3mm GRUB SCREW x 10

50577 3X10mm TAPPING SCREW x 10

50579 3X10mm STEP SCREW x 5

50580 3X10mm HEX BOLT x 10

50581 3X12mm COUNTER.TAPP.SCREW x 10

50582 3X14mm STEP TAPPING SCREW x 5

50583 3X15mm TAPPING SCREW x 10

50584 3X30mm CAP SCREW x 2

50585 4X10mm STEP SCREW x 5

50586 3mm WASHER x 15

50587 3mm SPRING WASHER x 15

50588 2mm E-RING x 15

50589 5mm E-RING x 5

50590 4mm BALL CONNECTOR x 5

50592 5mm BALL CONNECTOR x 10

50594 2X10mm SHAFT x 10

50595 NYLON BAND W/METAL HOOK x 10

50596 5mm ADJUSTER x 6

50597 DAMPER O-RING (RED) x 10

50599 W PARTS FOR 50519

50600 OIL SEAL FOR 50519 x 6

50602 DIFFERENTIAL BEVEL GEAR

50605 SCHRAUBENZAPFEN-BEU

50612 TGX G PARTS (50T S.GEAR&D.CASE)

50614 TGX, PARTS R-(REAR UPRIGHT/FRONT KNUCKL

50617 TGX ENGINE MOUNT x 2

50619 TGX CLUTCH SHOE

50620 16T CLUTCH BELL

50622 TGX THROTTLE LINKAGE

50626 TGX PILOT SHAFT

50627 DRIVE SHAFT

50628 TGX BRAKE PAD x 2

50629 TGX PROPELLER JOINT (F OR R)

50630 TGX BEVEL PINION&RING GEAR

50633 4mm ADJUSTER x 6

50797 5mm SHORT ADJUSTER (8 PCS.)

50800 TG10 GEAR CASE

50801 TG10 FRONT WHEEL HUB

50802 TG10 FRONT UPRIGHT

50803 TG10 BUMPER

50804 1/10 SCALE GLOW-ENGINE R/C TG10 U-SHAPED SHAFT

50805 1/10 SCALE GLOW-ENGINE R/C TG10-MK.1 CHASSIS

50807 TG10 PROPELLER JOINT(F)

50808 TG10 LONG WHEEL AXLE REAR

50811 RCE 1/10 CLK-GTR BODY PARTS SET

50813 TG10 BODY MOUNT (1PC. EACH)

50814 TG10 FRONT SUS ARM

50815 TG10 REAR SUS ARM

50816 1/10 SCALE GLOW-ENGINE R/C TG10 STEERING ARM

50817 1/10 SCALE GLOW-ENGINE R/C FRONT HUB CARRIER

50818 1/10 SCALE GLOW-ENGINE R/C TG10-MK.1 UPPER DECK

50819 TG10-MK.1 BATTERY CASE COVER

50822 3~10mm HEX HEAD TAPPING SCREW (10PCS)

50823 TG10 WHEEL AXLE (MB12 X2)

50883 39mm DRIVE SHAFT SET

53066 3X1280 SEALED BALL BEARINGS

53113 RACING INNER SPONGE

53152 SHORT TYPE HARD PROPELLER SHAFT

53208 LIGHTWEIGHT FLYWHEEL

53345 TL01/M03 TOE-IN REAR UPRIGHT

87025 CERAMIC GREASE

  

10005667 H PARTS

10115065 P PARTS

10445575 WHEEL

11054143 INSTRUCTIONS

12220001 LOCK NUT, 3mm

13455323 DAMPER SHAFT

14304019 (53171) TR-15T UP-GRADED BRAKE DISC

15494001 PLUG WRENCH

15494002 BOX WRENCH

16095001 ANTENNA PIPE

19495303 (9494023) STICKER (A,B) & MASKING SEAL

19805368 GEAR BOX JOINT BAG

19805556 2X8mm SCREW

19805557 4mm FLANGE LOCK NUT

19805572 3X12mm, 3X15mm SCREW

19805573 3X18mm STEP SCREW

19805574 3X18mm SCREW

19805575 3X18mm TAPPING SCREW

19805576 4mm FLANGE LOCK NUT

19805578 11X114mm DOUBLE SIDED TAPE

 

 

 All data from www.TamiyaBase.com