TamiyaBase Model DatasheetRaybrig NSX (44018) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 44018 |
 |
| Model name: | Raybrig NSX | |
| Scale: | 1/8 | |
| Chassis: | TGX-Mk.1
|
|
| Release date: | 15 Apr 1999 | |
| Last year available: | ||
| Price at release date: | 34000 Yen | |
| Type of model: | Touring/GT | |
| Body type: | Polycarbonate | |
Dimensions and weight |
|
| Overall length: | 525 mm |
| Overall width: | 234 mm |
| Overall height | 137 mm |
| Wheelbase: | 300 mm |
| Tread/track front: | 190 mm |
| Tread/track rear: | 200 mm |
| Ground clearance: | mm |
| Weight ready to run: | 2.02 kg (Fully equipped) |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 8,1 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | |
| Suspension type, rear: | |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
41006 SILICONE FUEL PIPE 41015 24mm AIR CLEANER 41017 80CC FUEL TANK 41018 THROTTLE SERVO HORN 41021 STARTER ROPE HOLDER 41026 TM-3 MUFFLER 41027 TM-3 MUFFLER GASKET SET 41030 R/C CAR GLOW ENGINE FS-15LT 50038 TOOL SET 50170 NYLON BAND SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50473 HI-TORQUE SERVO SAVER 50573 2X8mm TAPPING SCREW x 10 50574 2X8mm COUNTER.TAPP.SCREW x 10 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50579 3X10mm STEP SCREW x 5 50580 3X10mm HEX BOLT x 10 50581 3X12mm COUNTER.TAPP.SCREW x 10 50582 3X14mm STEP TAPPING SCREW x 5 50583 3X15mm TAPPING SCREW x 10 50584 3X30mm CAP SCREW x 2 50585 4X10mm STEP SCREW x 5 50586 3mm WASHER x 15 50587 3mm SPRING WASHER x 15 50588 2mm E-RING x 15 50589 5mm E-RING x 5 50590 4mm BALL CONNECTOR x 5 50591 5mm BALL COLLAR x 5 50592 5mm BALL CONNECTOR x 10 50593 4X6mm FLANGED TUBE x 5 50594 2X10mm SHAFT x 10 50596 5mm ADJUSTER x 6 50597 DAMPER O-RING (RED) x 10 50598 V PARTS FOR 50519 50599 W PARTS FOR 50519 50600 OIL SEAL FOR 50519 x 6 50601 PISTON ROD FOR 50332/519 x 2 50602 DIFFERENTIAL BEVEL GEAR 50603 DIFFERENTIAL BEVEL GEAR SET 50604 TGX WHEEL AXLE x 2 TA02/FWD T.C 50605 SCHRAUBENZAPFEN-BEU 50606 TGX A PARTS (GEAR CASE) 50607 TGX B PARTS (F&R SUS.ARM) 50608 TGX C PARTS (FRONT UPRIGHT) 50609 TGX D PARTS (BODY MOUNT) 50610 TGX, PARTS E-(BUMPER & SIDE GUARD) 50612 TGX G PARTS (50T S.GEAR&D.CASE) 50613 TGX R PARTS (R.UPRIGHT&F.K.ARM) 50614 TGX, PARTS R-(REAR UPRIGHT/FRONT KNUCKL 50616 TGX CHASSIS PLATE 50617 TGX ENGINE MOUNT x 2 50618 TGX, JOINT CUP (LONG & SHORT) 50619 TGX CLUTCH SHOE 50620 16T CLUTCH BELL 50621 TGX SUSPENSION ARM STAY 50622 TGX THROTTLE LINKAGE 50623 16T CLUTCH BELL 50625 TGX DRIVE SHAFT x 2 50626 TGX PILOT SHAFT 50627 DRIVE SHAFT 50628 TGX BRAKE PAD x 2 50629 TGX PROPELLER JOINT (F OR R) 50630 TGX BEVEL PINION&RING GEAR 50633 4mm ADJUSTER x 6 50710 TGX SLICKS W/INNER SPONGE x 2 50788 TGX UPPER DECK SET 50832 RCE 1/8 RAYBRIG NSX BODY PARTS 53030 4 X 850 SEALED BEARINGS 53066 3X1280 SEALED BALL BEARINGS 53208 LIGHTWEIGHT FLYWHEEL 53332 TA03R REAR LONG WHEEL AXLE SET 87025 CERAMIC GREASE |
10004115 H PARTS 10444118 WHEEL (2PCS.) GREEN 11054160 INSTRUCTIONS 12220001 LOCK NUT, 3mm 14304019 (53171) TR-15T UP-GRADED BRAKE DISC 15494001 PLUG WRENCH 15494002 BOX WRENCH 19494026 STICKER (A, B) & MASKING SEAL 19805501 THRAEDED SHAFT BAG 19805521 ANTENNA PIPE (38CM) 19805556 2X8mm SCREW 19805557 4mm FLANGE LOCK NUT 19805574 3X18mm SCREW 19805575 3X18mm TAPPING SCREW 19805578 11X114mm DOUBLE SIDED TAPE |
All data from www.TamiyaBase.com