Tamiya TG10R Chassis kit (44032)

This is an assembly chassis kit of a radio racing engine car for pure racing specifications. Reliable shaft drive 4WD is adopted for the double deck frame by 2.5mm thickness duralumin lower and 2mm carbon upper. The suspension is equipped with four high-performance TRF oil dampers and is a 4-wheel double wishbone with front and rear stabilizers. In addition, it uses a 2.5mm thick carbon damper stay in the front and back to support delicate damper settings. Furthermore, it is a high-grade model that meets the severe demands of experts, such as 2-speed transmissions and full bearings. Please choose your favourite body and engine.

Basic specifications
• Chassis material: 2.5mm Duralumin +2.0mm Carbon Fibre
• Chassis shape: double deck frame
• Steering tie rod: 3 part
• Suspension: front and rear double wishbone
• Caster angle-F/R: 8deg/0deg
• Camber angle-F/R: adjustable
• Toe angle-F/R: adjustable/1.5deg
• Damper: F/R TA04R super low-friction
• Transmission type: Shaft drive full-time 4WD
• Gear ratio: 8.1:1-6.4:1 (7.5:1-5.6:1)
• Diff. gear system: F/R 3-bevel diff
• Fuel tank capacity: 75cc
• Brake: disk type
• Tire width: F/R both 24mm
• Tire diameter: F/R both 64mm
• Tread pattern: F/R slicks

Separately required items
• Engine
• Muffler
• Manifold
• Air-cleaner
• R/C Unit: Adspec GT-II, or 2 channel R/C system for Glow-Engine R/C Cars, and batteries
• Fuel: appropriate fuel for glow-engine cars such as TG Fuel 2000 or TG Fuel 3000
• Fuel pump
• "Power Champ HP" 1.5V Alkaline booster battery
• Plug cable/clip
• Booster cable for use with plug heat alkaline batteries
• Plug heat alkaline battery TGX/TG10 Engine Starter Box or equivalent