TamiyaBase Model DatasheetTT-02RR chassis kit (47382) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 47382 |
 |
| Model name: | TT-02RR chassis kit | |
| Scale: | 1/10 | |
| Chassis: | TT-02RR
|
|
| Release date: | 01 Dec 2018 | |
| Last year available: | ||
| Price at release date: | 19800 Yen | |
| Type of model: | Onroad | |
| Body type: | None | |
Dimensions and weight |
|
| Overall length: | 400 mm |
| Overall width: | 180 mm |
| Overall height | mm |
| Wheelbase: | 257 mm |
| Tread/track front: | mm |
| Tread/track rear: | mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 6,55 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Double wishbone |
| Suspension type, rear: | Double wishbone |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
50597 DAMPER O-RING (RED) x 10 50598 V PARTS FOR 50519 50600 OIL SEAL FOR 50519 x 6 50822 3~10mm HEX HEAD TAPPING SCREW (10PCS) 50823 TG10 WHEEL AXLE (MB12 X2) 50875 5mm BALL CONNECTOR x 4 50883 39mm DRIVE SHAFT SET 51005 TT-01 P PARTS (SERVO HORN) 51049 MEDIUM-NARROW RACING SLICK 51144 TG10 MK.2 DIFF. BEVEL GEAR SET 51145 TG10 MK.2 DIFF. CASE PACKING 51211 3X5mm FLAT SCREW 51226 TT-01 & TGS URETHANE BUMPER L 51239 1050 BALL BEARING 51356 TB 03 06 MODULE SPUR GEAR (64T) 51423 64 T SPUR GEAR 51527 A PARTS 51528 B PARTS 51530 D PARTS 51532 LOWER DECK 53008 4 X 1150 SEALED BEARINGS 53159 4mm FLANGE LOCK NUT BLUE 53642 5mm ALUMINUM BALL CONNECTOR (BLUE) 53869 5mm BALL CONNECTOR NUT (SHORT) 54228 26T,27T FC 06 MODULE PNION GEAR SET 54501 PROPELLER SHAFT 54502 PROPELLER JOINT 54558 MOTOR MOUNT 54733 OP.1733 TT - 02 ALUMINUM REAR UPRIGHT (3.0 DEGREES) |
10114168 K PARTS (X1) 10444412 DIFFERENTIAL CASE BEVEL GEAR & RING GEAR(X1 EACH) 11056623 INSTRUCTIONS 14305026 SPANNER 14305125 MOTOR PLATE 19225056 Q PARTS 19335728 WHEEL 19400796 3X18mm TURNBUCKLE SHAFT 19415929 1280 BALL BEARING 19803156 SPUR GEAR MOUNT, 5X7X11.4MM SPACER 19803157 GEARBOX JOINT (MA20 X2) 19804159 3X10mm SCREW 19804194 3X10mm SCREW 19804200 3X10mm COUNTERSUNK HEAD SCREW 19804219 5mm O-RING (THIN) 19804394 2,6X10mm BINDING SCREW 19805211 SPONGE TAPE 19805548 PISTON ROD 19805573 3X18mm STEP SCREW 19805575 3X18mm TAPPING SCREW 19805629 3X12mm TAPPING SCREW 19805684 3X12mm SCREW 19805754 3X8mm TAPPING SCREW 19805755 3X22mm SCREW PIN 19805758 2mm WASHER 19805761 3X18mm TURN BUCLE SHAFT 19805776 2X9,8mm SHAFT 19805826 COIL SPRING 19805853 3X8mm SCREW 19805868 2X10mm SCREW 19808017 2X9mm SHAFT |
All data from www.TamiyaBase.com