TamiyaBase Model DatasheetWild Willy 2 Metallic Special (49337) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 49337 |
 |
| Model name: | Wild Willy 2 Metallic Special | |
| Scale: | 1/10 | |
| Chassis: | WR-02
|
|
| Release date: | 16 Dec 2003 | |
| Last year available: | ||
| Price at release date: | 14800 Yen | |
| Type of model: | Monster Truck | |
| Body type: | ABS | |
Dimensions and weight |
|
| Overall length: | 325 mm |
| Overall width: | 272 mm |
| Overall height | 270 mm |
| Wheelbase: | 172 mm |
| Tread/track front: | 200 mm |
| Tread/track rear: | 200 mm |
| Ground clearance: | mm |
| Weight ready to run: | 1.71 kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Double wishbone |
| Suspension type, rear: | Double wishbone |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
50023 MABUCHI RS-540 50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50355 18T, 19T AV PINION GEAR SET 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50582 3X14mm STEP TAPPING SCREW x 5 50583 3X15mm TAPPING SCREW x 10 50585 4X10mm STEP SCREW x 5 50586 3mm WASHER x 15 50592 5mm BALL CONNECTOR x 10 50594 2X10mm SHAFT x 10 50595 NYLON BAND W/METAL HOOK x 10 50596 5mm ADJUSTER x 6 50602 DIFFERENTIAL BEVEL GEAR 50736 TL01 B PARTS (UPRIGHT) 50737 TL01 C PARTS (SUSPENSION ARM) 50806 TG10 DRIVE SHAFT 50808 TG10 LONG WHEEL AXLE REAR 53023 20X4mm ALUMINIUM LOCK NUT 87025 CERAMIC GREASE |
10005713 A PARTS 10005746 D PARTS 10005747 E PARTS 10005748 F PARTS 10115255 K PARTS 10115256 L PARTS 10445169 LEFT UPRIGHT 10445207 RIGHT UPRIGHT 10555015 1150 PLASTIC BEARING 10555092 GEAR BAG 11055922 INSTRUCTIONS 12300030 3mm INTERNALLY TOOTHED WASHER 13485068 3X55mm U-SHAPED SHAFT 13580068 5X34mm PIPE 14305125 MOTOR PLATE 16095003 ANTENNA PIPE 18085027 ASSEMBELED GEARBOX 19004143 H & J PARTS (CHROMVERSION) 19334088 BODY SET (CHROMVERSION) 19405830 SCREW PIN BAG 19415592 METAL PARTS BAG A 19415593 METAL PARTS BAG B 19415594 METAL PARTS BAG C 19415595 METAL PARTS BAG D 19415596 SPEED CONTROLLER BAG 19495329 STICKER 19805213 TIRE 19805368 GEAR BOX JOINT BAG 19805557 4mm FLANGE LOCK NUT 19805576 4mm FLANGE LOCK NUT 19805584 3X32mm DAMPER SCREW 19805618 FRONT TIRE AND WHEEL (L&R, 1 PC EACH) 19805619 REAR TIRE AND WHEEL (L&R, 1 PC EACH) 19805620 3X25mm SCREW 19805621 5X50mm SHAFT 19805622 1150 METAL BEARING |
All data from www.TamiyaBase.com