TamiyaBase Model DatasheetThunder Shot (57001) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 57001 |
 |
| Model name: | Thunder Shot | |
| Scale: | 1/10 | |
| Chassis: | Thundershot
|
|
| Release date: | 19 Dec 1987 | |
| Last year available: | ||
| Price at release date: | 39800 Yen | |
| Type of model: | Buggy | |
| Body type: | Polycarbonate | |
Dimensions and weight |
|
| Overall length: | 390 mm |
| Overall width: | 240 mm |
| Overall height | 132 mm |
| Wheelbase: | 264 mm |
| Tread/track front: | 200 mm |
| Tread/track rear: | 200 mm |
| Ground clearance: | 35 mm |
| Weight ready to run: | 1.65 kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 7,67 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | |
| Suspension type, rear: | |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
50025 DOUBLE SIDED SERVO TAPE SET 50036 BALL BEARING SET 50038 TOOL SET 50073 BALL BEARING SET (4 PCS.) 50105 CIRCUIT BREAKER 50106 7.2V CONNECTOR SET 50112 1/10 RACING BUGGY DECAL SET 50170 NYLON BAND SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50186 SILICONE INSULATED WIRE 50189 RS-540SD BLACK SPRINT 50194 RUBBER BAG SET 50197 SNAP PIN SET 50200 RS-540SD BLACK ENDURANCE 50204 S PARTS, DIRECTLY CONNECTED SERVO SAVER 50228 PLASTIC BEARING SET 50233 4WD OVAL BLOCK TIRE FRONT WITH WHEEL 50234 4WD OVAL BLOCK TIRE REAR WITH WHEEL 50235 4WD PIN SPIKE TIRE FRONT WITH WHEEL 50236 4WD PIN SPIKE TIRE REAR WITH WHEEL 50238 BUGGY PINION GEAR SET (13,14T) 50239 BUGGY PINION GEAR SET (15,16T) 50240 BUGGY PINION GEAR SET (17,19T) 50241 HOTSHOT BALL BEARING SET 50242 850 BALL BEARING SET 50245 SNAP CONNECTOR SET 50249 RECEIVER BATTERY ELIMINATOR FOR SANWA 50250 RECEIVER BATTERY ELIMINATOR FOR FUTABA A TYPE 50251 RECEIVER BATTERY ELIMINATOR FOR FUTABA B TYPE 50252 RECEIVER BATTERY ELIMINATOR FOR JR 50253 FORWARD/REVERSE 3-STEP, SINGLE RESISTOR, BEC 50255 2 PIN MICRO CONNECTOR 50261 RECEIVER BATTERY ELIMINATOR FOR ACOMS 50262 RECEIVER BATTERY ELIMINATOR FOR KO 50274 TAMIYA DAMPER OIL 50284 BALL THRUST BEARING SET 50293 THE BIGWIG WHEEL SET 50294 0.2OHM CERAMIC RESISTOR (THREE TERMINAL) 50295 8.4V BATTERY ADAPTER 50304 CVA LONG SHOCK UNIT 50305 CVA SHORT SHOCK 50332 CVA MINI SHOCK UNIT 50333 THUNDER SHOT BODY PARTS SET 50334 THUNDER SHOT TYRE WITH WHEEL 50335 THUNDER SHOT JOINT CUP SET 50336 THUNDER SHOT DRIVE SHAFT SET 50337 THUNDER SHOT SPARE GEAR SET 50338 THUNDER SHOT REAR STABILIZER SET 50343 THUNDER SHOT PLATED WHEEL 50344 THUNDER SHOT SPARE TYRE (1 PAIR) |
10005300 A PARTS 10005301 B PARTS 10005303 D PARTS 10005313 F PARTS 10115001 S PARTS 10225031 Z PARTS 10225034 X PARTS 10225035 Y PARTS 10335086 CHASSIS 10445109 BUMPER 11825040 BODY 11835030 CHASSIS COVER 12595039 WHEEL AXLE 12595040 GEAR BOX JOINT LONG 12595041 GEAR BOX JOINT SHORT 12595042 PROPELLER JOINT 12595043 COUNTER SHAFT 13515003 PINION GEAR, 15T 14135025 DRIVE SHAFT 14505038 SPEED CONTROLLER 15395016 PROPELLER SHAFT 16095001 ANTENNA PIPE 16215012 TIRE 17265011 3 PIN CERAMIC RESISTOR 19005256 C PARTS 19005257 E & F PARTS 19335051 WHEEL 19405379 DAMPER BAG 19405380 THRUST WASHER BAG 19405381 SCREW PIN BAG 19405382 TOOL BAG 19465266 SCREW BAG A 19465267 SCREW BAG B 19465268 SCREW BAG C 19465269 SCREW BAG 0 19495087 THUNDER SHOT STICKER 19755154 BLISTER PACK 19805298 BEVEL GEAR BAG |
All data from www.TamiyaBase.com