TamiyaBase Model Datasheet

Raybrig NSX \'99 (58254)

All data from www.TamiyaBase.com

Model data
Model number: 58254
 Tamiya Raybrig NSX \'99 58254
Model name: Raybrig NSX \'99
Scale: 1/10
Chassis:

TA03R

 
Release date: 16 Nov 1999
Last year available: 2004
Price at release date: 22800 Yen
Type of model:  Touring/GT
Body type:  Polycarbonate

Dimensions and weight
Overall length: 435 mm
Overall width: 194 mm
Overall height 120 mm
 Wheelbase: 257 mm
Tread/track front: 157 mm
Tread/track rear: 165 mm
Ground clearance: mm
Weight ready to run: 1.10 kg (Chassis weight only)

Paint codes
Main body color(s) 86010

Technical
Gear ratio (lowest): 8,51 :1
Standard pinion: (module/teeth)
Motor in kit:

Part no: 17435034
Description: RS-540S
Speed controller in kit

Part no: na
Description: NA
Suspension type, front:

Double wishbone
Suspension type, rear:

Double wishbone
Damper type, front:

Part no: 50519
Description: C.V.A. MINI SHOCK II

Damper type, rear:

Part no: 50519
Description: C.V.A. MINI SHOCK II
Tyre, front:

Part no: 53293
Description: REINFORCED SLICKS TYPE A
Tyre, rear:

Part no: 53293
Description: REINFORCED SLICKS TYPE A
Wheel, front:

Part no: 10445708
Description: WHEELS (2 PCS)
Wheel, rear:

Part no: 10445708
Description: WHEELS (2 PCS)

 

 

Parts
All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings.
5 digit Spare Parts   7 digit Spare Parts

50038 TOOL SET

50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET

50197 SNAP PIN SET

50354 16T, 17T AV PINION GEAR SET

50355 18T, 19T AV PINION GEAR SET

50356 20T, 21T AV PINION GEAR SET

50357 22T, 23T AV PINION GEAR SET

50477 24T, 25T AV PINION GEAR

50573 2X8mm TAPPING SCREW x 10

50575 TAPPING SCREWS, 2.6X10mm (5PCS)

50577 3X10mm TAPPING SCREW x 10

50582 3X14mm STEP TAPPING SCREW x 5

50583 3X15mm TAPPING SCREW x 10

50585 4X10mm STEP SCREW x 5

50586 3mm WASHER x 15

50588 2mm E-RING x 15

50592 5mm BALL CONNECTOR x 10

50594 2X10mm SHAFT x 10

50595 NYLON BAND W/METAL HOOK x 10

50597 DAMPER O-RING (RED) x 10

50598 V PARTS FOR 50519

50599 W PARTS FOR 50519

50600 OIL SEAL FOR 50519 x 6

50601 PISTON ROD FOR 50332/519 x 2

50602 DIFFERENTIAL BEVEL GEAR

50604 TGX WHEEL AXLE x 2 TA02/FWD T.C

50605 SCHRAUBENZAPFEN-BEU

50643 TA02 & FWD TOURING CAR DRIVE SHAFT SET

50698 TA03 A PARTS (GEAR CASE)

50700 TA03 C PARTS (UPRIGHT)

50701 TA03 D PARTS (SUSPENSION ARM) x 2

50702 TA03 F PARTS (PULLEY) x 2

50705 TA03 KNUCKLE ARM

50717 TA03 E PARTS (BUMPER)

50718 TA03 G PARTS (GEAR)

50743 TA03R B PARTS (F. GEAR CASE)

50744 TA03 L PARTS (BODY MOUNT)

50768 TA03R BATHTUB CHASSIS

53008 4 X 1150 SEALED BEARINGS

53030 4 X 850 SEALED BEARINGS

53047 4 X 730 SEALED BEARINGS

53063 12T FT 13T HP STEEL PINIONS

53064 14T & 1ST HP STEEL PINIONS

53065 2X1260 SEALED BALL BEARINGS

53126 1510 SEALED BALL BEARING SET

53163 ON-ROAD TUNED SPRING SET

53267 TA03 BALL DIFFERENTIAL

53269 TA03 ALIUMIMIUM MOTOR MOUNT PLATE

53275 TA03 ALUMINIUM MOTOR HEAT SINK

53276 TA03 FLOURECENT COLOR STABLILZER SET

53278 TA03 ARAMID FIBER REINFORCED DRIVE BELT

53279 TA03 TORQUE SPLITTER SET

53280 TA03 SUPER LOW FRICTION DAMPER SET

53288 TA03 ALUMINIUM REAR UPRIGHT

53293 REINFORCED SLICKS TYPE A

53295 TIRE INNER FOAM (4 PCS)

53299 TA03R TORQUE CONTROL UNIT (14T/16T)

53304 TA03R URETHANE BUMPER SET

53310 UNIVERSAL DRIVE SHAFT

53311 TA03R CARBON REINFORCING PLATE

53316 ALUMINIUM FRONT HUB CARRIER

53325 TA03 ALUMINIUM KNUCKLE ARM (2 PCS)

53326 TA03 ALUMINIUM RACING STEERING SET

53332 TA03R REAR LONG WHEEL AXLE SET

53333 TOURING CAR TUNED SPRING (SHORT)

53347 3mm SPRING GRUB SCREW

53357 TA03 ALUMINIUM MOTOR PLATE

53358 TA03R CHASSIS CONVERSION

53364 TA03 CARBON STEERING BAR

87025 CERAMIC GREASE

  

10005655 H PARTS

10445708 WHEELS (2 PCS)

11055931 INSTRUCTIONS

11825169 BODY

13455381 TENSION PULLEY BUSHING

13455398 BUSHING

13555117 COUNTER SHAFT

14305125 MOTOR PLATE

16095003 ANTENNA PIPE

17435044 540 MOTOR

17795001 DAMPER OIL #900

17795002 PULLEY STOPPER FOR TA03 CHASSIS

19225056 Q PARTS

19415367 SPEED CONTROLLER BAG

19495334 STICKER (A,B) & MASKING SEAL

19805193 3X16mm THREADED SHAFT

19805368 GEAR BOX JOINT BAG

19805548 PISTON ROD

19805556 2X8mm SCREW

19805557 4mm FLANGE LOCK NUT

 

 

 All data from www.TamiyaBase.com