TamiyaBase Model Datasheet

HP Drift Spec Chassis Kit (58420)

All data from www.TamiyaBase.com

Model data
Model number: 58420
 Tamiya HP Drift Spec Chassis Kit 58420
Model name: HP Drift Spec Chassis Kit
Scale: 1/10
Chassis:

TB-03D

 
Release date: 17 Dec 2008
Last year available: 2011
Price at release date: 19800 Yen
Type of model:  Drift
Body type:  None

Dimensions and weight
Overall length: 363 mm
Overall width: 189 mm
Overall height mm
 Wheelbase: 257 mm
Tread/track front: 165 mm
Tread/track rear: 165 mm
Ground clearance: mm
Weight ready to run: 1.45 kg (Fully equipped)

Paint codes
Main body color(s)

Technical
Gear ratio (lowest): 7,09 :1
Standard pinion: (module/teeth)
Motor in kit:
Speed controller in kit
Suspension type, front:

Double wishbone
Suspension type, rear:

Double wishbone
Damper type, front:
Damper type, rear:
Tyre, front:
Tyre, rear:
Wheel, front:
Wheel, rear:
 

 

Parts
All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings.
5 digit Spare Parts   7 digit Spare Parts

49299 BALL DIFF SPRING

49300 620 BALL THRUST BEARING.

49350 2X25mm CAP SCREW - W/2mm LOCK NUT

50038 TOOL SET

50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET

50357 22T, 23T AV PINION GEAR SET

50380 E-RING SET

50575 TAPPING SCREWS, 2.6X10mm (5PCS)

50576 3mm GRUB SCREW x 10

50577 3X10mm TAPPING SCREW x 10

50586 3mm WASHER x 15

50588 2mm E-RING x 15

50594 2X10mm SHAFT x 10

50595 NYLON BAND W/METAL HOOK x 10

50597 DAMPER O-RING (RED) x 10

50598 V PARTS FOR 50519

50600 OIL SEAL FOR 50519 x 6

50875 5mm BALL CONNECTOR x 4

50880 TA04 BALL DIFF PLATE SET

51079 DF02 Q PARTS (SERVO HORN)

51093 46mm SUSPENSION SHAFT

51100 TB EVOLUTION IV 4,6X4,7mm FLANGED TUBE

51111 4mm ADJUSTER (FOR 3mm SCREWS)

51211 3X5mm FLAT SCREW

51216 9805482 / 50643 DRIVE SHAFT BAG

51239 1050 BALL BEARING

51253 B PARTS

51256 TB EVOLUTION V BALL DIFF. GEAR SET

51293 F PARTS

51351 A PARTS TB 03 (GEAR BOX)

51352 C PARTS

51353 D PARTS (2PCS.)

51354 E PARTS

51356 TB 03 06 MODULE SPUR GEAR (64T)

51371 N PARTS (SUS. MOUNT)

53030 4 X 850 SEALED BEARINGS

53042 BALL DIFF GREASE

53126 1510 SEALED BALL BEARING SET

53270 1060 BALL BEARING

53439 ANTI-WEAR GREASE (3G)

53539 5.5mm ALUMINUM SPACER SET

53577 TRF DAMPER URETHANE BUSH x 10

53587 5mm SHIM SET x 10 X 3 TYPES

53588 10mm SHIM SET x 10 X 3 TYPES

53726 6mm SHIM SET

53825 2.6mm SUSPENSION SHAFT

54020 MEDIUM-NARROW DRIFT TIRES

87022 MOLYBDENUM GREASE

  

11050798 INSTRUCTIONS

12990027 2mm HEX WRENCH

12990054 HEX WRENCH (2,5mm L)

13450102 PROPELLER JOINT A

13450103 PROPELLER JOINT B

13485182 PROPELLER SHAFT

14305026 SPANNER

14305125 MOTOR PLATE

15405047 MOTOR MOUNT

16095010 ANTENNA PIPE (30mm)(BLACK)

16274020 URETHANE BUMPER

19115221 K PARTS

19115222 CHASSIS

19115224 S PARTS

19115242 M PARTS

19225056 Q PARTS

19335043 BODY

19400750 METAL PARTS BAG A

19400870 METAL PARTS BAG B

19400871 METAL PARTS BAG C

19400872 METAL PARTS BAG D

19495570 STICKER

19804159 3X10mm SCREW

19804194 3X10mm SCREW

19804200 3X10mm COUNTERSUNK HEAD SCREW

19804202 3X23mm COUNTERSUNK HEAD SCREW

19804205 5mm BALL CONNECTOR

19804206 5mm BALL CONNECTOR NUT

19804212 3X6mm ROUND HEAD SOCKET SCREW

19804286 3X6mm COUNTERSUNK HEAD SCREW

19804381 5X9mm HEX HEAD BALL CONNECTOR

19805185 850 METAL BEARING BAG

19805240 O-RING 7/3mm

19805548 PISTON ROD

19805557 4mm FLANGE LOCK NUT

19805612 3X10mm CAP SCREW

19805628 3X42mm THREADED SHAFT

19805636 3X6mm SCREW

19805645 3X0,7mm SPACER

19805684 3X12mm SCREW

19805696 3X8mm COUNTERSUNK HEAD SCREW

19805702 6mm SNAP PIN

19805780 3X23mm TURN BUCLE SHAFT

19805800 3X32mm TURNBUCLE SHAFT

19805823 2X8mm SHAFT

19805826 COIL SPRING

19805853 3X8mm SCREW

19805859 3X15mm SCREW

19805886 MOUNT SCREW

19805977 3X12mm COUNTERSUNK HEAD SCREW

19808012 5mm BALL CONNECTOR NUT (SHORT)

19808014 3X15mm FLAT SCREW

19808016 STEERING POST

19808021 4,5X3,5mm FLANGED TUBE

19808026 10mm SNAP PIN

19808156 3X16mm COUNTERSUNK HEAD SCREW

19808192 WHEEL AXLE

 

 

 All data from www.TamiyaBase.com