TamiyaBase Model DatasheetSuper Clod Buster Metal Plated Special (58423) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 58423 |
 |
| Model name: | Super Clod Buster Metal Plated Special | |
| Scale: | 1/10 | |
| Chassis: | Clod
|
|
| Release date: | 17 Dec 2008 | |
| Last year available: | 2013 | |
| Price at release date: | 36800 Yen | |
| Type of model: | Monster Truck | |
| Body type: | ABS | |
Dimensions and weight |
|
| Overall length: | 480 mm |
| Overall width: | 380 mm |
| Overall height | 340 mm |
| Wheelbase: | 270 mm |
| Tread/track front: | 270 mm |
| Tread/track rear: | 270 mm |
| Ground clearance: | 55 mm |
| Weight ready to run: | 5.01 kg (Without RC/battery) |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 30,1 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Trailing arm, coil spring |
| Suspension type, rear: | Trailing arm, coil spring |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
45037 TEU-103BK BRUSHED 50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50327 CLOD BUSTER SPARE GEAR SET 50576 3mm GRUB SCREW x 10 50586 3mm WASHER x 15 50589 5mm E-RING x 5 50592 5mm BALL CONNECTOR x 10 50595 NYLON BAND W/METAL HOOK x 10 53065 2X1260 SEALED BALL BEARINGS 87025 CERAMIC GREASE |
10004874 F PARTS (CHROM METALLIC) 10004894 H PARTS (CHROM METALLIC) 10005294 B PARTS 10005295 C PARTS 10005296 D PARTS 10005297 E PARTS 10115059 K PARTS 10335085 CHASSIS 12220001 LOCK NUT, 3mm 13515001 PINION GEAR, 13T 16095001 ANTENNA PIPE 17435097 MOTOR 19005236 A PARTS 19005927 G PARTS (CHROM METALLIC) 19115021 J PARTS 19115146 L PARTS 19335040 WINDOW 19335041 ROLL. BAR 19335085 WHEEL BAG 19335541 BODY FRONT & REAR (CHROM METALLIC) 19400110 DRIVE SHAFT BAG 19400114 PRESS PARTS BAG 19400874 ROD BAG 19400875 TOOL BAG 19405351 METAL PARTS BAG 19405353 BALL CONNECTOR BAG 19465624 SCREW BAG A 19465625 SCREW BAG B 19465626 SCREW BAG C 19465627 SCREW BAG D 19495431 STICKER & MASKING SEAL 19804230 2mm NUT 19804370 4mm WASHER 19805170 FRONT COIL SPRING (LONG) 19805185 850 METAL BEARING BAG 19805226 TIRE BAG 19805227 THREADED SHAFT 19805229 DRIVE SHAFT (LONG & SHORT) 19805230 WHEEL AXLE 19805231 COUNTER SHAFT 19805233 BEVEL JOINT 19805234 WHEEL HUB 19805235 BALL CONNECTOR, 8mm 19805556 2X8mm SCREW 19805557 4mm FLANGE LOCK NUT 19805629 3X12mm TAPPING SCREW 19805636 3X6mm SCREW 19805664 3X30mm SCREW 19805693 6mm WASHER 19805729 3X21mm TAPPING SCREW 19805758 2mm WASHER 19805897 3mm FLANGE NUT 19808209 INSTRUCTIONS |
All data from www.TamiyaBase.com