TamiyaBase Model DatasheetKing Yellow 6x6 (58653) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 58653 |
 |
| Model name: | King Yellow 6x6 | |
| Scale: | 1/18 | |
| Chassis: | G6-01
|
|
| Release date: | 20 Jan 2018 | |
| Last year available: | ||
| Price at release date: | 19800 Yen | |
| Type of model: | Monster Truck | |
| Body type: | Polycarbonate | |
Dimensions and weight |
|
| Overall length: | 478 mm |
| Overall width: | 270 mm |
| Overall height | 239 mm |
| Wheelbase: | 173 mm |
| Tread/track front: | 200 mm |
| Tread/track rear: | 200 mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 18,39 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | |
| Suspension type, rear: | |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50355 18T, 19T AV PINION GEAR SET 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50582 3X14mm STEP TAPPING SCREW x 5 50586 3mm WASHER x 15 50592 5mm BALL CONNECTOR x 10 50594 2X10mm SHAFT x 10 50595 NYLON BAND W/METAL HOOK x 10 50596 5mm ADJUSTER x 6 50602 DIFFERENTIAL BEVEL GEAR 50736 TL01 B PARTS (UPRIGHT) 50737 TL01 C PARTS (SUSPENSION ARM) 50797 5mm SHORT ADJUSTER (8 PCS.) 50808 TG10 LONG WHEEL AXLE REAR 50822 3~10mm HEX HEAD TAPPING SCREW (10PCS) 50855 TL01 E PARTS (BODY MOUNT) 50883 39mm DRIVE SHAFT SET 50956 7mm SNAP PIN x 10 53439 ANTI-WEAR GREASE (3G) 53689 540-J MOTOR 84175 4X11,5mm STEP SCREW 84195 3mm O-RING (BLACK) 87099 CERAMIC GREASE |
10005748 F PARTS 10555015 1150 PLASTIC BEARING 10555092 GEAR BAG 11054955 CHASSIS SET INSTRUCTIONS 11057000 BODY SET INSTRUCTIONS 11825905 BODY SET LEXAN UNLACKIERT 12300030 3mm INTERNALLY TOOTHED WASHER 12500029 THREADED SHAFT, 3X32mm 13485068 3X55mm U-SHAPED SHAFT 13580068 5X34mm PIPE 14305125 MOTOR PLATE 16095003 ANTENNA PIPE 16294011 SPONGE TAPE (20X100mm) 18000072 8X60mm RUBBER TUBING 19000970 D PARTS 19000971 E PARTS 19004457 H PARTS 19335777 IDLER GEAR (X3) 19495921 STICKER, MASKING STICKER 19803063 WHEEL (X2) 19804159 3X10mm SCREW 19804285 3X25mm SCREW 19804394 2,6X10mm BINDING SCREW 19804996 FRONT WHEEL AXLE (MB11 X2) 19805185 850 METAL BEARING BAG 19805213 TIRE 19805368 GEAR BOX JOINT BAG 19805469 5x19mm, 5x30mm SHAFT 19805557 4mm FLANGE LOCK NUT 19805576 4mm FLANGE LOCK NUT 19805584 3X32mm DAMPER SCREW 19805621 5X50mm SHAFT 19805622 1150 METAL BEARING 19805629 3X12mm TAPPING SCREW 19805684 3X12mm SCREW 19805729 3X21mm TAPPING SCREW 19805756 3X32mm SCREW PIN 19805853 3X8mm SCREW 19805895 3X20mm SCREW 19805976 3X46mm SCREW PIN 19808001 BUMPER COIL SPRING 19808211 3X37,7mm THREADED SHAFT |
All data from www.TamiyaBase.com