TamiyaBase Model DatasheetM-06R chassis kit (84312) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 84312 |
 |
| Model name: | M-06R chassis kit | |
| Scale: | 1/10 | |
| Chassis: | M-06R
|
|
| Release date: | 08 Dec 2012 | |
| Last year available: | ||
| Price at release date: | 26800 Yen | |
| Type of model: | Onroad | |
| Body type: | None | |
Dimensions and weight |
|
| Overall length: | 324 mm |
| Overall width: | mm |
| Overall height | mm |
| Wheelbase: | 210 mm |
| Tread/track front: | mm |
| Tread/track rear: | mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 5,8 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Double wishbone |
| Suspension type, rear: | Double wishbone |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
42168 COIL SPRING (SOFT, BLACK/RED)(MEDIUM BLACK/YELLOW)(HARD BLACK/BLUE) 50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50356 20T, 21T AV PINION GEAR SET 50573 2X8mm TAPPING SCREW x 10 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50578 3X10mm COUNTER.TAPP.SCREW x 10 50579 3X10mm STEP SCREW x 5 50583 3X15mm TAPPING SCREW x 10 50586 3mm WASHER x 15 50588 2mm E-RING x 15 50594 2X10mm SHAFT x 10 50595 NYLON BAND W/METAL HOOK x 10 50596 5mm ADJUSTER x 6 50597 DAMPER O-RING (RED) x 10 50642 FWD TOURING CAR E PARTS (MECHANISM DECK) 50823 TG10 WHEEL AXLE (MB12 X2) 50875 5mm BALL CONNECTOR x 4 50882 TA04 KING PIN SET 51000 HI-TORQUE SERVO SAVER (BLACK) 51008 BEVEL GEAR SET/TT-01,TGS 51391 M05 C PARTS (SUSPENSION ARM) 51393 F-PARTS UPRIGHT M-05 51432 A PARTS & (19335595) CHASSIS FRAME 51433 B PARTS 51434 D PARTS 51435 E PARTS 51437 URETHANE BUMPER 53008 4 X 1150 SEALED BEARINGS 53160 4mm FLANGE LOCK NUTS RED 53239 M-CHASSIS FRONT AND REAR STABILISER SET 53334 LOW FRICTION DAMPER V PARTS 53351 ALUMINIUM REINFORCED TAPE 53439 ANTI-WEAR GREASE (3G) 53443 SILICONE DAMPER OIL SOFT SET 53539 5.5mm ALUMINUM SPACER SET 53573 TRF DAMPER PISTON 3-HOLE x 4 53574 TRF DAMPER ROD GUIDE&O-RING x 4 53576 TRF DAMPER OIL SEAL x 4 53640 5mm ALUMINUM BALL NUT (BLUE) 54121 ALUMINUM HORN FOR TORQUE SERVO SAVER 54193 STEERING POST, STEERING POST STAY 54195 3X93mm TURN-BUCKLE SHAFT 54267 REAR UPRIGHT (BLUE) 54270 SERVO MOUNT (BLUE) 54277 (19000183) GEAR BAG 84195 3mm O-RING (BLACK) 87099 CERAMIC GREASE 94392 850 BALL BEARING |
11054646 INSTRUCTIONS 11420595 STICKER 12300010 9mm WASHER 13455035 ANTENNA HOLDER 13550027 5X40mm SHAFT 13555048 5 X 21mm SHAFT 14305026 SPANNER 14305125 MOTOR PLATE 16095010 ANTENNA PIPE (30mm)(BLACK) 19400796 3X18mm TURNBUCKLE SHAFT 19804159 3X10mm SCREW 19804198 3X5,5X0,5mm SPACER 19804199 3X3,0mm SPACER 19804237 GEAR BOX JOINT 19804285 3X25mm SCREW 19804394 2,6X10mm BINDING SCREW 19805502 REAR WHEEL AXLE 19805503 DRIVE SHAFT 19805504 PISTON ROD 19805575 3X18mm TAPPING SCREW 19805611 5X9mm BALL CONNECTOR 19805629 3X12mm TAPPING SCREW 19805636 3X6mm SCREW 19805684 3X12mm SCREW 19805702 6mm SNAP PIN 19805756 3X32mm SCREW PIN 19805780 3X23mm TURN BUCLE SHAFT 19805831 2X8mm CAP SCREW 19805853 3X8mm SCREW 19805859 3X15mm SCREW 19805886 MOUNT SCREW 19805887 3X8mm COUNTERSUNK TAPPING SCREW 19805976 3X46mm SCREW PIN 19805977 3X12mm COUNTERSUNK HEAD SCREW 19805991 3mm LOCK NUT 19808011 3X8mm SCREW 19808053 3X37mm STAINLESS SHAFT 19808077 2mm SHAFT GUIDE 19808169 DAMPER CYLINDER 19808170 PISTON ROD 19808189 3X8mm FLAT SCREW |
All data from www.TamiyaBase.com