Downside of TB being offline I found another nice TF/TFevo.
Previous owner is a TC member but not sure under which name. This is quite a nice runner setup with some fine enhancement, like trf adjusters, Dust covers, trf ceramic balldiff balls (those are 2€ a piece ), HiCaps, Universal drive shafts at the rear, and mmmmm TF evo decals Tamiya orange dishwheels and new tires. So that already paid for the car and then, not mentioned in the add, more spare parts J front shockmounts 3x and a MR shocktower , oh and that all came in the original TF box plus manual and did I mention the aluminium wing mounts and the hexagonalmount. |
|
Please Log in to join the conversation. |
|
Nic looking car
Foam washers to stop smeg getting in the balljoints is a good idea At least until they get wet... |
Please Log in to join the conversation. |
|
Waterbok can i buy your spare wing mounts and front body mount? They are like rocking horse badword and i dont have
I actually have an avante metal parts bag nip fresh from japan, i only need 1 piece to substitute my plastic j12. Would you consider a swap? You can have the rest of the pack i think that will leave you 2x alloy j12 substitutes and whatever else came in pack. |
Please Log in to join the conversation.
Last edit: by DanDare420. Reason: pleasepleaseplease
|
Uh very tempting but I need the hexagonal bit myself, so sorry, If you mean with the front mount the alloy hexagonal bit.
You could use the avant PC1 part to make wing mounts just cut it in half and drill some holes in it (you might need to tap the 3mm thread) and the PC3 or PC4 could be converted to a front mount. that was my plan untill these spares fell into my lap. Would be interrested in 1 or 2 of your J12 substitutes (gave one away myself so could use new ones) If you want to stick to original parts I might part with my wingmounts. I thought I did see the hexagonal bit somewhere at Seidel for not to much money but I cant remember from which car and under which name |
|
Please Log in to join the conversation.
Last edit: by waterbok.
|
BD17 from the bruiser
could work as front mount replacement.
almost scary how I know my way around Tamiya spares
The following user(s) Liked this: DanDare420
|
|
Please Log in to join the conversation.
Last edit: by waterbok.
|
|
Yeah that bruiser part looks promising, would consider trading the wing mounts for the rest of the avante bag , you may aswell take rest of it as u prolly will have an avante at some point. Did find some dyna storm pieces that could work for all 3 pieces im missing, only problem is its 18gbp to find out. And then it looks to come with the avante looking bits aswell derp.
|
Please Log in to join the conversation. |