I have fitted Zakspeed Capri body from the TT02 to my TA02
tamiyabase.com/...ge-chassis Mind the Capri body is on the short TT02 wheelbase (252mm) and will not fit a TA02 without TA01 arms and lowering..
The following user(s) Liked this: Gripper107
|
|
Please Log in to join the conversation. |
|
Very nice, how did it look when it was finished?
|
Please Log in to join the conversation. |
|
How about this one on ebay?
202097059164 Would it fit? |
Please Log in to join the conversation. |
Yep it will fit.
The following user(s) Liked this: Gripper107
|
|
Please Log in to join the conversation. |
|
Fantastic, I'll pick one up.
|
Please Log in to join the conversation. |
|
Can I get away with painting it with standard spray paints or will I need to use the tamiya spray paints?
|
Please Log in to join the conversation. |
You need lexan (polycarbonate) paint as these bonds to the lexan. Normal paint will flake off with minimal effort. There are many brands out there that have polycarbonate in their selection, so hunting paint should not be difficult at all. Most hobby shops should carry lexan paint
The following user(s) Liked this: Gripper107
|
|
Please Log in to join the conversation. |
|
Hey thanks, I've got a ton of spray paints but none are for rc body Shells, I won't chance using them if they won't stick properly.
I'll have to hunt some down online as nowhere around where I live sells them anymore. Anyone tried ps46? It looks pretty fancy.
The following user(s) Liked this: caprinut
|
Please Log in to join the conversation. |
|
The following user(s) Liked this: Nefarious
|
Please Log in to join the conversation. |