A cute size 4WD car that can be played wild and can be wheelie-driven A complete electric radio control car with a compact size that fits comfortably in the palms of both hands. The angular body, which is inspired by a small cross-country vehicle, is an original design by Kayuki Yamazaki, a hyper designer who handles a wide range of fields from cars to motorcycles, hobbies, and fashion. The body painted in light blue and marked is made of polycarbonate, so it is a nice point that it is light and shock resistant. The chassis that adopts the gear drive 4WD demonstrates outstanding small turning performance by combining the differential gears equipped on the front and rear and the short wheelbase. In addition, wheelie driving is possible by simply grasping the throttle lever of the transmitter. The rear part of the chassis is equipped with parts reminiscent of two exhausts to create fun. The RC mechanism is "Fine Spec 2.4G Proposal Set (with TRE-01)". Equipped with a TRE-01 unit that integrates a receiver and ESC (Electronic Speed ??Controller), it can run on four AA alkaline batteries and can also use an LF1100 battery. A mud mud with large diameter block tires that allows you to enjoy wild driving anywhere. It's a fun RC car that makes you smile in spite of its funky movements. Adopts a gear drive 4WD, SW-01 chassis packed with fun driving The 4WD chassis, SW-01, is packed with fun in an almost A5 size compact body with a total length of 190 mm and a total width of 160 mm. A 370 motor is set in the center of a slim and strong monocoque frame, and a gear drive 4WD that transmits power back and forth with gears is adopted. Combined with a large diameter block tire with a diameter of about 70 mm, it realizes powerful driving. In addition, a heavy battery is mounted at the rear of the upper part of the car body. Wheelie driving is possible just by grasping the throttle lever of the transmitter tightly and starting suddenly. The suspension is a strut type 4-wheel independent equipped with a coil spring. Adopted a mechanism that connects the suspension upper with the left and right arms and interlocks with the steering. It suppresses the inclination of the car body during cornering, and demonstrates outstanding small turning performance combined with the effect of the differential gears installed in the front and rear. From indoors to outdoors, you can run anywhere. Uses 2.4G radio that can be easily played with multiple units Not only the painted body and the completed car body, but also a wheel trigger type transmitter that is easy to control is set. The RC mechanism uses a 2.4GHz radio set that can be easily enjoyed by multiple units without the need for band adjustment such as crystal replacement. 2.4GHz, which is also used for computer wireless LAN, has a one-to-one correspondence between the transmitter and receiver (body), so there is no concern about interference, and the transmitter and receiver have already been paired. There is no need for troublesome setup work. In addition, the transmitter is a wheel trigger type that is ideal for maneuvering a car. With the switch on the back, you can switch between two speeds of normal power with one push. In addition, the thickness of the grip can be adjusted by attaching and detaching the grip cover, and the trigger cover can be attached and detached. Even small hands can easily grip the grip and operate the back.