Participate in the powerful RC track race! In Europe it is a popular motor sports "track racing" boasting 30 years of history. It is a completed electric radio control car that reproduces the machine of Hearn · Racing team who enters this race competing while huge trailer heads hit hard while cornering. The body is made of lightweight and strong shock-resistant polycarbonate. It is painted with white and blue, and many sponsor stickers unique to the racing specification are pasted. In addition, it is a finish with a high sense of scale with side mirrors, coupled couplers and rear bumpers as moulded parts. Optional LED units can be attached to the front and rear lights, and you can enjoy lighting. Running with a little bit different from a touring car, the powerful form has plenty of new charm. Adopt TT - 01 chassis TYPE - E of shaft drive 4WD easy to manoeuvre The chassis adopts the TT - 01 TYPE - E of a longitudinally placed motor / shaft drive 4 WD. The glass fibre reinforced nylon resin A high chassis rigidity was secured by equipping an upper deck made of Upper Deck made by the manufacturer and a gear cover. The steering system is a 3 division type with little play and smooth movement. Low centre of gravity · good balance design and 4 wheel double wishbone suspension, equipped in front and behind Diff gears and others make manoeuvrability good. Radial tire with outer diameter of 70 mm was attached to the plating wheel which realistically reproduced to the bolt shape. Both are designed exclusively for track racing, high tire tires produce mild cornering performance. Also equipped with an ESC (Electronic Speed ??Controller) that can run backward, you can enjoy smooth speed control both forward and backward. Use 2.4 G Prop with casual play with multiple units As well as the painted finished car body, as well as the wheel trigger type transmitter which is most suitable for the car control, the 7.2V battery for running, the charger was also set. RC Mechanism does not need band adjustment such as crystal exchange, feel free Adopt 2.4 GHz propo set that can be enjoyed by multiple units 2. Since the transmitter and the receiver (car body) correspond to each other on a one-to-one basis at 2.4 GHz which is also used for the wireless LAN etc. of the computer, there is no worry of interference, Since the machine and the receiver are already paired, there is no need for troublesome setup work. The transmitter adopts the grip cover and the trigger cover. It can be adjusted by detaching and it is easy structure for even the small hands System = vertical motor, shaft drive full time 4WD ? differential gear = front and rear 3 bevels ? steering = 3 division tie rod type ? suspension = double wishbone 4-wheel independent ? damper = front and rear friction ? Gear ratio = 8.35: 1 ? Motor = 540 type ? Speed ??controller = ESC (electronic speed controller) installed ?Separately required items? ? Four AA size batteries for transmitter