A 4WD racing buggy hot shot that has captivated many RC fans. The body and rear wing are made of shock-resistant and lightweight polycarbonate. Two fog lamps, two antenna poles with flags with hot shot emblems, and an exhaust pipe-like megaphone muffler will tickle your playfulness. In addition, 4 consecutive auxiliary lights can be attached to the front bumper. Along with fog lamps, optional LEDs can be installed, so you can dress up. The chassis adopts a gear drive 4WD GF-01CB and is equipped with ST block bubble tires with excellent grip. You can enjoy powerful driving anywhere from pavement to off-road, and if you squeeze the throttle lever of the transmitter, you can also wheelie with the front wheel lifted. The GF-01CB chassis is based on the gear drive 4WD GF-01, which has a motor mounted in the center of a light and strong monocoque frame and transmits power to the front and rear wheels with gears. The frame-integrated gear case is a closed type that shuts out sand and pebbles. A built-in differential gear creates smooth cornering. Suspension is an independent 4-wheel double wishbone with CVA oil dampers as standard. The suspension arm has a wide tread that prevents it from tipping over, and the mounting position of the damper can be adjusted to expand the range of settings. The wheel is a two-piece type with red rims and white spokes. Equipped with ST block bubble tires featuring a stepped block pattern, you can drive powerfully anywhere. In addition, you can enjoy performance improvement and setting with abundant optional parts. The ESC (Electronic Speed ??Controller) is equipped with a sensor model TBLE-04S that is compatible with 15.5T or higher brushless motors. In addition to the painted finished car, a wheel trigger type transmitter that is ideal for car control, a 7.2V battery for driving, and a charger are also included. The RC mechanism is a 2.4GHz specification that can be easily enjoyed with multiple units. 2.4GHz, which is also used for computer wireless LAN, has a one-to-one correspondence between the transmitter and the receiver (vehicle), so there is almost no worry about interference, and the transmitter and receiver are already paired. , there is no need for troublesome setup work. In addition, the transmitter adopts a grip cover and a trigger cover. It can be adjusted by removing the cover, making it easy to operate even for people with small hands.