TOPIC:

First coat on the midnight. Metalic black not full boxart. But could be nice after clear coats. 

Can't go wrong with metallic black Flo!!👍👍

Sure jim, with a gloss finish, it should be almost boxart like I wanted for my midnight shelfqueen. Just need to find good steering wires to end it.

Absolutely, looks great 

The hardest wil be the clear coat because of the temperature and can't spray inside home....

I am familiar with that problem....

FINALLY the turnbuckles for the Pro-X arrived, Ready for the enduro now

 

Ripper Man!!! 

I bought some flat pack, laser cut MDF storage things recently – first one was sold as a pencil box, but works pretty well for model brushes. I have a dirty great Tamiya sticker that could go on the front of this, so will put a couple of coats of sanding sealer on first. 




50 Vallejo bottle holder with 4 drawers underneath for paint cups & thinners etc … I thought this could just live on top of my printer & I could move it when I needed too, but full it’s not that practical, and I’ve already filled it & have to sit an additional 30 bottle holder in front. I don’t think my chargers need to be out all the time, so will move them at some point.  




Eight 4 drawer units, glued together in blocks of four – these now hold a lot of stuff I previously had standing in mugs or just in small stacks on the shelves.The fire extinguisher limits access to some of the drawers, but they hold duplicates and/or stuff I don’t need easy access to. Labels are fancy production paper out with a scalpel, text done in MS Word by changing the text colour to white & “highlight”ing it all in black. 

The autopsia is not complete, but the chassis is not very far from it...