TOPIC:

after taking a peek at the manual and looking at my other WR02s I came up with the following idea, instead of throwing out half the kit it might be more economical to get the following instead.

2x 50737 GF01/WR02 C parts
1x 10008265 GF01 D parts
1x 10005748 GF01 F parts
1x 0005757 TL01 Bparts fiber reinforced

1x 10555092 GF01 Gearset
300mm 5mm diam carbon pipe (gearshafts)
handfull 1150 ballbearings

GF01 metal parts bag C

2x 53218 hardened outdrives gear diff
2x universals WR02 54394

dampers alloy or
2x 50519 or 1x 84366


1x 53303 Adjustable Upper Arm Set For TL-01
1x 53301 TL-01 Stainless Steel Suspension Shaft Set

some other bits and pieces
set of decent wheels
and of course the FJ flatbed body

that should be up to a beating

now waiting for Tamico and Seidel to list the parts

I have no idea of what you will do with all these parts, but it looks like a lot of good planning, and I'm sure the result will be exciting

-Lars

Most of the parts is what usually gets used to make Willy 2 stronger.

Well as the parts are still not available seperatly I got me the kit.
But phew, loads off leftovers even if build standard

So here is the final result.

not much build pics, i am so sorry.









great ride, its suprisingly fast with the torque tuned.
might be swapping some gearboxes on my 2wd Willy's

Hey wb, check this new item : 54597 Aluminium Gear Case Support (GF-01, WR-02).

yep noticed that one on Tblog, no pictures yet.
Bit fuzy what they mean, but looks it might be something that mount on the front and rear.
Maybe even to attach dampers to.

btw was closeby at the weekend.

Wow, nice pics. Great wheels by the way.
I think they put the original Japanese description through a bad translator...
Still sounds quite promising (even though I wouldn't know a Willy from a Wonka).

terrible!!!!!!!!!!!
bay Watch. But were is Pamela???

She's behind the camera with wb.