Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Peugeot 406 / Mercedes CLK GTR restoration help

Peugeot 406 / Mercedes CLK GTR restoration help 3 days 7 hours ago #54966

Dear Gents / Ladies

I hope you can help me.

I have 2 old 1:10 model RC cars that I built a long time ago and i mean a long time.

One is a Peugeot 406 ST (58212) and the other is the belt drive Mercedes CLK GTR (58214).

My three your old son has took a shine to them but they are a bit worse for wear with some parts a bit tired and I would like your advice on if I can get certain parts.

They both have a dial speed controller and that needs to be changed on the Peugeot and I wanted to know what i can have to replace them? If so what would you suggest?

The Mercedes needs a new pulley wheel for the front end of the belt as well as a new belt.

Possibly an upgraded motor as these are both nearly at the end of their lives

I have attached the manuals from this website that give the parts if that will make life easier considering their ages.

Peugeot ( tamiyabase.com/...dels/58212 )
Mercedes ( tamiyabase.com/...dels/58214 )

Any help would be greatly appreciated.

Best Regards

Andy

Please Log in to join the conversation.

Peugeot 406 / Mercedes CLK GTR restoration help 3 days 5 hours ago #54968

All partq are available on the net and you can find very cheap and efficient esc. You need ball bearings to.

Please Log in to join the conversation.

Peugeot 406 / Mercedes CLK GTR restoration help 3 days 5 hours ago #54969

With picts it should be easier to help you.
And welcome. ;)

Please Log in to join the conversation.

  • Page:
  • 1
Moderators: Jonny RetroAndyAus
Time to create page: 0.974 seconds