|
Turnigy do a very similar unit, Hobbyking do them for 7 USD each but they don't have input/output plugs & are fussy about thow they're wired in (shared earth means whatever you're switching has to be powered by the same battery as the RX). |
Please Log in to join the conversation. |
|
Wild Willy - is it complete? I don't see wheels, tyres, box lid, driver, body, etc etc there ... if it is complete, in the UK an NIB, LWB Willy would go for 450-500 GBP, s/loads more for an SWB. If it's not complete, you just have a pile of nice bits ... parting it out would be a hassle but you would probably do quite well financially. Frog - it's a nice one, but I wouldn't see that going for much more than 70 GBP, Having the the wrong chassis might ding the price a bit more. I wouldn't think the Strine market is that much different. Hornet - looks to be a mix of original & re-re, so a bit less than the Frog. |
Please Log in to join the conversation. |
|
hi the frog its all original the chassis is red not original colour
as for the hornet yes the chassis is all original but the body is rerelease I have the original body still in box after a while they tend to left the stickers as for the wild willy its all there I covered all the trees so they don't brake off and to stop scratches to the chassis |
Please Log in to join the conversation. |
|
hi you said that you can only use one battery
that's wrong you can use 2 battery's if you as long as the earth wire from both battery runs together thanks |
Please Log in to join the conversation. |
|
I put in a low bid for the heck of it. Looks like a rough rider suspension... except the steering knuckles and some other small differences. Still looks like the start of a custom build I some frog knuckles and a copper tube frame on that
|
Please Log in to join the conversation. |
|
That's a front end for a
LaTrax buggy
from the 70's. Much rarer than an SRB, but I don't know if it has any value.
|
Please Log in to join the conversation. |
|
Well, this is one of a nice customized Blackfoot
|
Please Log in to join the conversation. |