Hi,
I'm new to Tamiya RC. I have an ACOMS 27MHz receiver in the car with a 27.255Mhz blue crystal. The controller has a missing crystal. Can I buy and use a pair of 50Mhz crystals in the transmitter and receiver? Would it work, or must I use 27MHz? Thanks |
|
Please Log in to join the conversation. |
|
Welcome. You must use a 27mhz similar tx crystal.
A small advice, buy a new pair tx rx crystals in 27 am range. |
Please Log in to join the conversation. |
|
AM if your radio is in AM band or fm if fm band.
|
Please Log in to join the conversation. |
|
In theory, you should be quite with 2 frequencies under or upper another guy in the same band.
But with modern technology, you should use a 2,4ghz radio set. No more interférences and a radio set is cheap (less than 30€ for a set without servo) |
Please Log in to join the conversation. |
The 37.095 can't be used on the the 27mHz system. But 26.995 will work. And make sure they are for AM or FM systems. Both receiver, transmitter and crystals needs to be either AM or FM. |
|
Please Log in to join the conversation. |
|
It should be ok
|
Please Log in to join the conversation. |