The following user(s) Liked this: stingray-63, jord001
|
|
Please Log in to join the conversation. |
Non yet. Will be in this thread eventually tamiyabase.com/...ms?start=0 |
|
Please Log in to join the conversation. |
|
Final two full figure willy bodies assembled & filled ... in hindsight it would have been better not to fill yet ...
Boots & gloves cut off: Gently heated with a hot air gun to squish them slightly, making them look more like gloves & boots, and not so much body parts ... Not wanting to throw away anything potential useful, I had a go at removing the harness - very roughly at first ... Then up to the lines. Note how thick the Willy body is moulded: 75% or so of the thickness removed, these could be used on a Tamiya 4x4 driver figure or the Sand Rover driver (with some modification): Attachments: |
Please Log in to join the conversation. |
|
Crazy good idea Jonny.
The following user(s) Liked this: jord001
|
Please Log in to join the conversation. |
|
Attachments: |
Please Log in to join the conversation. |
|
The following user(s) Liked this: jord001
|
Please Log in to join the conversation. |