I have plans for a extraction system over the main workbench (For welding gases also) Keep an eye out and you will see it when I build it If you can't fix it with a hammer, you've got an electrical problem mate
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation.
Last edit: by AndyAus.
|
|
Dude!
|
Please Log in to join the conversation. |
Another good day for me, I managed to score 11 sheets of green tongue flooring which i am going to line the clean room with for HALF price 😁😁 So after I collected them I got on to clearing out the last of the stuff from the old shop and removing the roof Now that its done I have all the insulation and materials to continue with the new shop bar some boards for the front and carpet tiles
If you can't fix it with a hammer, you've got an electrical problem mate
|
|
Please Log in to join the conversation. |
|
Are you going to be able to save the Indian artwork?
|
Please Log in to join the conversation. |
I had thought about it, but have decided to do something different and RC related in the new shop. Because the whole area is getting the walls covered with Bamboo panels It will all get painted Black, no more Art If you can't fix it with a hammer, you've got an electrical problem mate
|
|
Please Log in to join the conversation.
Last edit: by AndyAus.
|
Another hugely productive day Moved the wall with the Indian painted on it back 12mm then built a frame to fill in where the door was :O. Cut the ply down and refitted after putting planking plate in all the holes, Still need to blank the rest of the wall s holes before paint
Also got the second coat of green on the far side and rear of the new shed and after wet sanding with scotch brite this morning, I managed the first coat of grey on the near side and the privacy gate Tomorrow I will finish the green and grey so I'm ready to start cladding the front And hopefully I can get all the old shop walls painted too If you can't fix it with a hammer, you've got an electrical problem mate
|
|
Please Log in to join the conversation. |
|
Pretty nice Andy.
|
Please Log in to join the conversation. |